~~Title: Configuration files~~

====== Configuration files ======

Download file, copy it to microSD card (FAT/FAT32 filesystem), insert into display and go to Controller - Updates and settings - Import.\\
Don't change filename, or controller will not find it. If it was renamed by system (multiple files with same name) you need to fix filename.\\
Standard names for controller configurations: ncconf.cfg, ncconf2.cfg, …, ncconf9.cfg

===== Small geared motors =====

Includes PID regulators preset for small geared motors.\\
{{:en:controller:setup-examples:ncconf6.cfg|Import configuration 6}}

===== Sur-Ron Light Bee, 3 speed mode, configuration =====

Standard surron configuration.\\
Default 16S battery (110A peak, 90A nominal), 500A phase, 48T wheel sprocket.\\
{{:en:controller:setup-examples:ncconf3.cfg|Import configuration 3 for P24F}} \\
{{:en:controller:setup-examples:ncconf2.cfg|Import configuration 2 for older controllers}}

===== Talaria Sting MX3, 3 speed mode, 8kW configuration =====

Talaria MX3 configuration.\\
Default 38.4Ah 16S battery, 500A phase, 13-44T sprockets.\\
{{:en:controller:setup-examples:ncconf5.cfg|Import configuration 5}}

===== Talaria Sting MX4, 3 speed mode, 11kW configuration =====

Talaria MX4 configuration.\\
Default 43.5Ah 16S battery, 500A phase, 13-44T sprockets.\\
You can setup up to 220A battery current at your own risk, this may damage battery!\\
{{:en:controller:setup-examples:ncconf7.cfg|Import configuration 7}}

===== Talaria XXX, 3 speed mode, 6.6kW configuration =====

Talaria configuration.\\
Default 16S battery 110A, 400A phase, 14-48T sprockets.\\
{{:en:controller:setup-examples:ncconf8.cfg|Import configuration 8}}