meta data for this page
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
en:controller:examples [2022/08/09 19:41] dmitry [Configuring the config loading with the CAN button] |
en:controller:examples [2022/08/09 19:41] (current) dmitry [Configuring the config loading with the CAN button] |
||
|---|---|---|---|
| Line 9: | Line 9: | ||
| In the settings of the controller with firmware version 0.8.7 and newer, it became possible to instantly download the desired configuration from the SD card to the Controller by pressing a button. This can be useful when using several different batteries, so that when you change batteries, you can quickly load new settings without using the import and export menus. Or, if you want to quickly change the controller settings from low power to high power config. The configuration loaded in this way is not saved in the Controller upon restart, unless it is specifically saved in the Controller menu after import. To download, the SD card must be in the on-board computer and the number in the configuration file name must match the number of the function configured in the Controller. You can use several methods to load the configuration: | In the settings of the controller with firmware version 0.8.7 and newer, it became possible to instantly download the desired configuration from the SD card to the Controller by pressing a button. This can be useful when using several different batteries, so that when you change batteries, you can quickly load new settings without using the import and export menus. Or, if you want to quickly change the controller settings from low power to high power config. The configuration loaded in this way is not saved in the Controller upon restart, unless it is specifically saved in the Controller menu after import. To download, the SD card must be in the on-board computer and the number in the configuration file name must match the number of the function configured in the Controller. You can use several methods to load the configuration: | ||
| - | - [[en: | + | - [[en: |
| - External switch, connected to On-board computer. | - External switch, connected to On-board computer. | ||
| - External switch, connected to Controller. | - External switch, connected to Controller. | ||