meta data for this page
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
en:display:start [2023/06/27 06:23] dmitry [Information] |
en:display:start [2023/10/05 11:52] (current) dmitry |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ~~Title: On-board computer ~~ | ~~Title: On-board computer ~~ | ||
| - | ====== On-board computer (v0.80B) ====== | + | ====== On-board computer (v0.82B) ====== |
| - | The On-board computer is equipped with a large sunlight resistant screen to display main parameters, driving modes settings, software updates for all system components, battery control, and the charging state of the devices via USB. On the left side of the On-board computer there is a slot for a microSD card, which is used to update the firmware, save screenshots, | + | The On-board computer is equipped with a large sunlight-resistant screen to display main parameters, driving modes settings, software updates for all system components, battery control, and the charging state of the devices via USB. On the left side of the On-board computer there is a slot for a microSD card, which is used to update the firmware, save screenshots, |
| //Technical specifications:// | //Technical specifications:// | ||
| Line 251: | Line 251: | ||
| In the menu **On-board computer** > **Main screen setup** > **Demo mode** you can turn on the animation of the status bars on the main screen when starting the On-board computer. Select values **On** and **Off**. \\ | In the menu **On-board computer** > **Main screen setup** > **Demo mode** you can turn on the animation of the status bars on the main screen when starting the On-board computer. Select values **On** and **Off**. \\ | ||
| - | |||
| Line 350: | Line 349: | ||
| ==== Firmware update ==== | ==== Firmware update ==== | ||
| - | In the menu item **On-board computer** > **Update | + | In the menu item **On-board computer** > **Update |
| - | {{: | + | {{: |
| ~~CL~~ \\ | ~~CL~~ \\ | ||
| - | In the menu item **On-board computer** > **Forced update of devices** you can force a firmware update of any device visible in the **Setting** > **Devices** menu without having to go to the menu of each device separately to update it. This function will also be useful if you have updated the On-board computer to the latest firmware, and the Controller has firmware v.7.18 (and lower) and is not visible in the **Setting** > **Devices** menu due to the new protocol. \\ | + | In the menu item **On-board computer** > **Update and settings** > **Forced update of devices** you can force a firmware update of any device visible in the **Setting** > **Devices** menu without having to go to the menu of each device separately to update it. This function will also be useful if you have updated the On-board computer to the latest firmware, and the Controller has firmware v.7.18 (and lower) and is not visible in the **Setting** > **Devices** menu due to the new protocol. \\ |
| - | {{: | + | To update, download the firmware file to the root directory of the microSD card with Fat/Fat32 file system. Insert the card, with the contacts on top, into the connector on the On-board Computer. After that, go to the menu item **On-board computer** > **Update and settings** > **Forced update of devices** and select the device you want to update. Press the right button on On-board Computer to start the update. After restarting, check the firmware version under **On-board Computer** > **Device Information**. |
| - | + | ||
| - | To update, download the firmware file to the root directory of the microSD card with Fat/Fat32 file system. Insert the card, with the contacts on top, into the connector on the On-board Computer. After that, go to the menu item **On-board computer** > **Forced update of devices** and select the device you want to update. Press the right button on On-board Computer to start the update. After restarting, check the firmware version under **On-board Computer** > **Device Information**. | + | |
| ~~CL~~ \\ | ~~CL~~ \\ | ||
| + | |||
| ==== Reset settings ==== | ==== Reset settings ==== | ||
| - | In the menu section **On-board computer** > **Reset settings**, you can reset all settings to the factory settings. To reset, press the right button of the On-board computer. \\ | + | In the menu section **On-board computer** > **Update and settings** > **Reset settings**, you can reset all settings to the factory settings. To reset, press the right button of the On-board computer. \\ |
| ==== Import and export of settings ==== | ==== Import and export of settings ==== | ||
| - | In the menu items **On-board computer** > **Export parameters** and **On-board computer** > **Import parameters** you can export and import previously made On-board computer settings to the microSD card. | + | In the menu items **On-board computer** > **Update and settings** > **Export parameters** and **On-board computer** > **Update and settings** > **Import parameters** you can export and import previously made On-board computer settings to the microSD card. |
| {{: | {{: | ||
| Line 387: | Line 385: | ||
| ==== Memory ==== | ==== Memory ==== | ||
| - | At the bottom of the menu section **On-board computer** are the menu items for working with memory of the On-board computer. | + | In the menu section **On-board computer** > **Update and settings** are the menu items for working with memory of the On-board computer. |
| **Save dump** — copying information about the state of the system (memory dump) to an SD card. This function is used by developers to find errors in the device code. \\ | **Save dump** — copying information about the state of the system (memory dump) to an SD card. This function is used by developers to find errors in the device code. \\ | ||
| **Erage storage** — erase the memory and all settings of the On-board computer. \\ | **Erage storage** — erase the memory and all settings of the On-board computer. \\ | ||