meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
en:ulight [2022/04/18 10:10]
dmitry [Inputs configuration] 		en:ulight [2022/04/18 10:11]
dmitry [Inputs configuration]
Line 63: Line 63:
 The settings for Temperature sensor T2 are similar to those for Temperature sensor T1. \\ The settings for Temperature sensor T2 are similar to those for Temperature sensor T1. \\
 **CAN-Control** — this setting refers to the **THR**  (throttle), **BRK**  (brakes), **IO2**, and **IO3**  inputs on the uLight board and is used when the throttle, brakes and switches are connected directly to the uLight board. When you select the **On**  setting, control signals from the inputs will be transmitted via the CAN bus and you will be able to control the Controller from the uLight board using the throttle, brake and switch inputs. \\ **CAN-Control** — this setting refers to the **THR**  (throttle), **BRK**  (brakes), **IO2**, and **IO3**  inputs on the uLight board and is used when the throttle, brakes and switches are connected directly to the uLight board. When you select the **On**  setting, control signals from the inputs will be transmitted via the CAN bus and you will be able to control the Controller from the uLight board using the throttle, brake and switch inputs. \\
-**CAN ports** — redirecting inputs to groups of CAN ports for controlling the controller. Choice of OFF, CAN 1-8 and CAN 9-16.+**CAN ports** — redirecting inputs to groups of CAN ports for controlling the controller. Selectable values — **OFF**, **CAN 1-8** and **CAN 9-16**.
  
 ==== Function setup ==== ==== Function setup ====