meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
en:ulight [2022/04/18 10:12]
dmitry [Inputs configuration] 		en:ulight [2022/04/18 10:15]
dmitry [Function setup]
Line 66: Line 66:
  
 ==== Function setup ==== ==== Function setup ====
-Function setup allows you to select which function each input on the uLight board or CAN input in the Controller or On-board computer corresponds to. All settings in this section of the menu have the same selection of functions: \\ **Off **— disabled. \\ **On**  — enabled. If the lights are connected, they will light constantly. \\ **I1-I6**  — select the number of the input on the uLight board to which the switchch for turning on the lights is connected. You can check the operation of the button in the menu section **Inputs values**, items **Input I1-Input I6**, when the button is turned on, the values ​​will change to **On**. \\ **C1-C16**  — selection of the CAN input number when controlling via the CAN bus. It is used when [[:en:display:start#display_buttons_setup|connecting]] external control buttons to the On-board computer or when using the On-board computer buttons (Hot key). **C1-C16**  are software values, there are fewer physical inputs on the boards, currently, eight CAN ports **IO1-IO8**  are available on the On-board computer (see [[https://drive.google.com/file/d/1KkEgWcJ5U-AEkk6GrXhDNlYXFCcsjpUQ/view|diagram]]).+Function setup allows you to select which function each input on the uLight board or CAN input in the Controller or On-board computer corresponds to. All settings in this section of the menu have the same selection of functions: \\  
 +**Off **— disabled. \\  
 +**On**  — enabled. If the lights are connected, they will light constantly. \\  
 +**I1-I6**  — select the number of the input on the uLight board to which the switchch for turning on the lights is connected. You can check the operation of the button in the menu section **Inputs values**, items **Input I1-Input I6**, when the button is turned on, the values ​​will change to **On**. \\  
 +**I7_T1** and **I8_T2** — selection of the virtual port of the temperature sensor T1 and T2. 
 +**C1-C16**  — selection of the CAN input number when controlling via the CAN bus. It is used when [[:en:display:start#display_buttons_setup|connecting]] external control buttons to the On-board computer or when using the On-board computer buttons (Hot key). **C1-C16**  are software values, there are fewer physical inputs on the boards, currently, eight CAN ports **IO1-IO8**  are available on the On-board computer (see [[https://drive.google.com/file/d/1KkEgWcJ5U-AEkk6GrXhDNlYXFCcsjpUQ/view|diagram]]).
  
 {{:en:output_config.png?nolink&  }} {{:en:output_config.png?nolink&  }}